Start with service conditions
Part operating temperature, impact loads, UV, detergents and electrical demands determine which data sheets are relevant.
A washing machine fascia and a load-bearing sliding guide need different material evidence; one resin cannot be promoted as optimal for all plastic parts.
Grade and compound matter
ABS, PC, PP, PA and POM are useful families in design discussions. Actual shrinkage and performance depend on fillers, modifiers, suppliers and processing.
Specify the exact commercial resin grade once selected, together with conditioning and material verification needs. A family name does not establish compliance or physical properties.
Validate the finished article
Paint, ink, printing or assembly adhesives can affect the selected substrate. Approve finish adhesion, colour and functional compatibility in the target configuration.
Medical equipment parts need an intended-use review. The brochure does not substantiate ISO 13485, sterility or biological safety claims.
Working review table
| Issue | Design or procurement action |
|---|---|
| ABS | Evaluate appearance, impact, heat and coating compatibility. |
| PC | Check operating heat, impact and chemical environment. |
| PP | Compare chemical resistance, shrinkage and surface finishing needs. |
| PA | Assess moisture conditioning and dimensional change. |
| POM | Assess friction, wear and mating surface compatibility. |
← Scroll table horizontally on smaller screens →
Before you send the RFQ
Document the current design revision, expected service conditions, the part receiving this component and who will approve samples. Discuss technical exceptions openly rather than burying them in a general note.