Design release
Mark the critical features, revision, sample standard and intended use.
PRODUCTION
Plastic Parts Assembly in the production sequence
The supplied profile identifies electronic assembly work and shows a semi-automatic assembly operation. Assembly is offered as a project-specific extension to injection molding.
What this operation is responsible for
Parts delivered as an assembly need a clear bill of materials, incoming-part inspection, torque or fastening instructions and an agreed functional check.
The process is defined by part geometry and acceptance standards. A component may move to finishing or assembly after molding, but the entire route should be planned rather than assumed.
OEM project workflow →PROCESS TABLE
Inputs, outputs and control points
An engineering quote is more accurate when each operation has a clear deliverable.
| Decision / operation | Engineering discussion |
|---|---|
| Bill of materials and revision alignment | Specify measurable acceptance criteria, related drawing revision and the buyer approval milestone. |
| Assembly sequence and work instructions | Specify measurable acceptance criteria, related drawing revision and the buyer approval milestone. |
| Fastener, clip and gasket installation | Specify measurable acceptance criteria, related drawing revision and the buyer approval milestone. |
| Final cosmetic and functional acceptance | Specify measurable acceptance criteria, related drawing revision and the buyer approval milestone. |
| Material and dimensions | Review exact grade and tolerance requirements against actual geometry. |
| Project scale | Confirm volume, number of tools and expected production schedule. |
← Scroll table horizontally on smaller screens →
ENGINEERING
Where coordination makes the difference
Molded dimensions, coating layers and final assembly fits interact. Verify them in the order used for the production part.
Tool or line setup
Connect process equipment, inspected geometry and cycle strategy.
Receiving acceptance
Define inspection state, surface sampling and lot traceability.
FAQ
Technical questions to close
No generic capability claim can substitute for a detailed drawing review.
| Question | Required input |
|---|---|
| Which specific equipment? | Part projected area, mass, mould envelope and applicable machine details. |
| Which resin grade? | Material specification, colour, fillers, regulatory or durability constraints. |
| How is quality approved? | Critical-to-quality dimensions, A-surface reference, tests and sign-off owner. |
| Who owns the tooling? | Tooling contract, revisions, future maintenance and transfer arrangements. |
← Scroll table horizontally on smaller screens →
Send a drawing for review
MOQ depends on part type and order value. New customers may request 1–5 samples where suitable. Mixed models are possible at around USD 1,500 total. Small 1–2-piece orders can cost more per piece. Indicative lead times: standard items 10–25 working days; custom parts 20–45; project equipment 45–120. EXW, FOB, CIF and DAP are common; FCA, CFR, CPT, CIP and DDP can be agreed case by case.